Auto News » Autoshows

Modified Merecedes Unimog Camper Now Available

Ken — Thu, 27 May 2010 11:22:48 +0000

The Mercedes-Benz Unimog is now available for yet another action, as a group of vehicle enthusiasts coming from Bocklet, Germany has developed an expedition camper patterned after the UniversalMotorGerät (Universal Motorized Unit, the Unimog’s full name). Michael Bocklet and his group developed an old Unimog U 4000 which has a 2,249 cc four cylinder diesel engine with a maximum power of 218 HP and exhibits intense off-road potentials. The Unimog U 4000 has been built-in with a 290 I diesel tank and two 20 liter reserve gas tanks. The group has mounted a camper module which is 4.35 m long, 2.2 m wide and 1.95 m high. The module makes use of a 50 mm thermal bridge-free fiberglass-reinforced plastic to be fitters as its walls and another 60 mm to be used as its floor.

The insides of the vehicle has also been fixed with benches that showcase Alcantara upholstery, where the whole back area of the vehicle features a 200×135 cm double bed. The vehicle also holds 300 liters of fresh water and its waste tank can carry a maximum of 200 liters. The vehicle also includes a washroom that is fitted with a cassette toilet, wash basin, shower and a gas/electric boiler. It presents a corner kitchen that includes a two-burner gas stove, sink and a drainer. Also fitted is a wardrobe and a 100- liter compressor fridge installed in the access area leading to the cab.

The modified Unimog utilizes a hot air interior heater powered by diesel, a 200 Ah battery, 260W solar panels, LED spots, TFT TV, Sattelite dish and a DVD player. The total size of the Camper Unimog measure 6.85 m long, 2.35 m wide and 3.5 m high and has a pricetag of EUR 248,000.

Mazda unveils 90th Anniversary Biante 20S NAVI SPECIAL

Ken — Thu, 27 May 2010 11:21:00 +0000

Mazda has announced a new limited-edition ride based on its Biante 20S MPV and exclusively dedicated to the brand’s 90th anniversary celebrations. Dubbed Mazda Biante 20S NAVI SPECIAL, the newly styled mid-size 8-seater hatchback will be available only at the Japanese market in limited number of 400 examples.

The 90th Anniversary Mazda Biante 20S NAVI SPECIAL differs from its series brother by few new remarkable goodies, including a HDD navigation system and a parking assist unit. In addition to that, the front-wheel-drive (FWD) model packs Mazda’s unique idling stop system, i-stop, and qualifies for Japan’s eco-car incentive program and government’s tax reduction program, which results in 75 per cent tax reductions.

The limited MPV is priced at just 73,500 yen (approximately 815.00 USD) above the 20S base model’s list price and is already available at Mazda Anfini and Mazda Autozam dealerships across Japan.

Toyota TSI Cosworth CS400

Ken — Wed, 26 May 2010 14:28:52 +0000

Toyota CS400 Cosworth TSI will be published by Edition limited to 75 units. The car is the result of one of the most interesting collaborations lately. It is the first car road Cosworth developed since 1996, when Ford Escort Cosworth was abandoned. CS400 TSIs will be some happy owners lifetime thrill.

Toyota TSI Cosworth CS400 is one of the most powerful sedan on the market. It is powered by four turbocompressé cylinder Boxer 400ps developing 2.5 litres. Thanks to the extensive formula 1 experience, this engine produced 33% more than the power of the plant Cosworth. Power is put on the road through six-speed manual gear box. Acceleration is astonishinrg – 3.7 seconds to 100 km / h and speed of tip of 155 mph (electronically limited). Car covers a quarter of a mile in 12,75 seconds at a speed of 107 mph terminal.

All major components in the car are specially calibrated to Cosworth. It includes the revised system turbo sport exhaust, suspension, brakes and wheels and some enhancements to the outside and inside to do even more exclusive CS400 IST.

Subaru Impreza TSI Coswroth CS400 is developed for the UK market if the car is in the form of right-hand drive. It is available in a choice of three exterior colours – Spark Silver, Dark Grey and San Remo red.

CS400 IST is the price of £ 49 995 road.

ASI LX570 Invader – ooops INVADER L60

Ken — Wed, 26 May 2010 13:01:18 +0000

There a few weeks, most automotive blogs and sites of news, which we published information exclusively about the creation of the ASI last tuning ya developed, the ASI LX570 invasion. But according to official information later, which comes directly from Satoshi Kondo, the CEO of ASI, the Lexus LX570 Wide Body conversion alternative Japanese expert is a project designed by Technologies Invader.

To clarify matters even more, Mr. Kondo fell a few lines of the newly created company Invader info.

“Technologies Co. Ltd. Invader is a new performance tuning established in Nagoya, Japan in 2009 studio.”

Although it is very new, company is not foreign to the high performance vehicles universe of range: created by people who have extensive expertise with the highest level of motor sport and high range luxury vehicles. Technologies Invader is an independent company, working closely with the manufacturer to Japanese tuning high ASI Corp – tuner established range known for their luxury and sports such as Bentley and Ferrari cars work. Our companies share customer service facilities and work closely on a number of projects. In addition, the chief designer for vehicles Invader is Mr. Satoshi Kondo, Director General of the ASI.

But rather than develop upgrades adjustment may be sold separately, Invader Technologies focuses on production cars full end to end, in collaboration with models high range of Japanese manufacturers. The studio aims to provide high clientele range from a combination of unmatched performance, luxury, design advanced and highest quality, which is Japan is respected for the world and that summarizes in the currency of the company: more power, more individuality, more freedom.

All Invader Technologies production facilities are located in Nagoya, Japan. With the INVADER logo branded vehicles are manufactured hand by some of the best engineers in Japan, people with race in blood, who know what it takes to be a winner. Studio tuning Technologies Invader ‘ can be considered a luxury, boutique recovery customers exclusive high-end. “Now, with its new real name – L60 INVADER – officially confirmed, the Lexus LX570 Wide Body transformation is the same off-road as you have already read.” It has a 5.7 magnificent litres to 600 horses through a specially designed compressor and overcome carbon unit performance exhaust V8. Outside the range high tower has aggressively style kit wide fuselage reinforced by huge alloy 22-inch tires wrapped high performance.

The invasion L60 is able to cover the classic sprint from zero to 100 km / h in just 5.5 seconds prior to reaching its peak speed.

BMW EfficientDynamics 320d-1,013 miles on one tank of fuel

Ken — Wed, 26 May 2010 11:44:19 +0000

To celebrate properly recent success of BMW Motorsport in the 24 hours Nürburgring 2010 race event, G-power, expert BMW rides secondary market performance unveiled two towers Clubsport based on the current M3, the G-POWER M3 TORNADO CS and M3 WG2-POWER G S.

Fully loaded with 600 horses aboard, two monsters performance BMW are equipped with some amazing under the hood, including a supercharger SK II CS, a high performance ASA radial T1-522, dual stream air carbon, important cast aluminum cooling supercharger, air intake compressor system goodies to cast aluminium as a unit special titanium exhaust air box.

The G-POWER M3 WG2 S is for demanding lovers for a BMW round like the Porsche 911 GT3 RS, whose performance mixtures at the end of the day, as race cars is not yet fully legal route.

The other new, the G-POWER M3 TORNADO CS is designed as a lightweight of the G-POWER M3 S spectacular WG2 version.

In addition to the refined power compartments, superb walks in Bavaria weight reduction G-power versions boast approximately 150 kg each, which is less than 1,500 kg dry weight. WG2 S conversion, these figures are achieved through a kit body fully carbon, which packs a skirt new front, rear valance, ultralight wings, redesigned front lips carbon and carbon multi-aileron part back. qualities in addition, a 20-3-inch frame SILVERSTONE RS forged wheels all wrapped with MICHELIN pilot sport Cup sport 245/30 R 20 size front tire and 315/25 R 20 rear axle ensures a perfect route and handling outfit.

G-POWER first M3 TORNADO CS and the M3 WG2 S

Ken — Wed, 26 May 2010 11:39:12 +0000

The G-POWER M3 WG2 S is for demanding lovers for a BMW round like the Porsche 911 GT3 RS, whose performance mixtures at the end of the day, as race cars is not yet fully legal route.

The other new, the G-POWER M3 TORNADO CS is designed as a lightweight of the G-POWER M3 S spectacular WG2 version.

Suzuki Parts: the Main Reason for Suzuki’s Continuous Success

Ken — Sun, 02 May 2010 17:07:23 +0000

Suzuki Motor Corporation is a Japan-based multinational corporation that is known for its specialty in designing and manufacturing wide varieties of machineries such as motorcycles, marine engines, wheelchairs and automobiles. Being the 12th largest vehicle manufacturer in the world, the company has over 45,000 employees and has 35 facilities or manufacturing plants in different countries and territories worldwide. The commitment to providing consumers with safe, reliable, and practical vehicles has made Suzuki a household name in automotive industry. Armed with the advanced technologies in precision machining and automotive design, consumers are assured of the quality and performance delivered by Suzuki vehicles and Suzuki parts.

Suzuki is known for its fine selections of automobile and All-Terrain Vehicles or ATVs. With their refined craftsmanship on compact vehicles, the company has developed excellent on-road performance and aggressive off-road capabilities among their vehicle lineups. Suzuki ensures that all its vehicle model offerings are equipped with only the best quality of Suzuki parts to guarantee reliable road performance with no fail. With the use of first-rate automotive engineering and design techniques, every component that makes up the companyâs assembly lines are tested within high standards for quality assurance to meet the consumerâs durability and performance expectations.

Similar to other machines that come out of the Suzuki assembly plants, Suzuki parts are subjected to a series of strength tests to determine their capacity to withstand the punishments of various road conditions. Under varying levels of heat, pressure, and load, every component needs to pass rigorous performance tests to be included in Suzukiâs vehicle assembly lines. This way, the company manages to maintain integrity on the quality and overall reliability of their sporty and compact vehicle model offerings.

As one of the fastest-growing Japanese companies in America, the company has come a long way in marketing Japanese ingenuity in the automotive industry. In continuously offering new releases of Vitara, Forenza, Reno, and other popular Suzuki model, Suzuki has won the hearts of many Americans in providing them with tough, sporty, practical and inexpensive means of transportation. Aside from reliable and efficient Suzuki rides, Suzuki parts take major share in the companyâs marketing successes. By making sure that every Suzuki vehicle runs within the companyâs strict performance specifications, they safeguard the unmatched drivability features of any Suzuki ride.

Euromobil Aims For Higher Sales Of Audi Brand In Malaysia

Ken — Sun, 02 May 2010 10:14:33 +0000

Euromobil Aims For Higher Sales Of Audi Brand In Malaysia
PEKAN, May 2 (Bernama) — DRB-HICOM Bhd subsidiary, Euromobil Sdn Bhd, which recently secured the Audi franchise after years of being a key dealer, is aiming for higher sales before initiating local production of the German marque.

which model car suzuki motor company has sold highest numbers uptill now?

Ken — Sun, 02 May 2010 03:23:02 +0000

where can i get a new/rebuilt motor for a 79 suzuki samuri?

Ken — Sat, 01 May 2010 20:16:11 +0000

i live in washington and it need to be in washington. i have a 79 suzuki samuri and the motor is going bad and i do not want to rebuild it so i am looking for a place to get a motor within washington.. Help!!!